Anti-Corrosion Paints & Coatings
“Nanocomposite Barrier Coating Provides Superior Corrosion Protection”
NANOMYTE® TC-5001 is a one component protective coating to prevent metals, such as galvanized steel, from corroding. Galvanization alone does not provide prolonged corrosion protection, as the steel still suffers from white and red rust. TC-5001 is applied on top of the galvanized steel to act as a dense, hard and durable coating to eliminate contact between metal and moisture. The coating also reduces the chipping of paint, as observed on galvanized steel, and adheres strongly to bare, pretreated or painted metal surfaces. The formulation can be tailored to meet customers’ specifications and can be microns to mils thick. TC-5001 can be applied to metal by dipping, spraying or brushing.
- Hard, dense nanocomposite barrier coating
- Bonds to bare, pretreated or painted metal surfaces
- Customized formulations possible
Addresses problems related to corrosion (rust), oxidation, moisture and ice formation, acid rain, chemical stains, UV damage, mold build up, marine biofouling, and animal waste contamination.
Military, aerospace, marine, automotive, infrastructure (pipelines, buildings, towers, bridges), electronics
Iron, steel, stainless steel, zinc plated and galvanized steel, aluminum, copper and bronze, powder coated metals, and painted and primed metals.
Metal surface must be clean, dry and in sound condition. Remove all oil, grease, dust, dirt, and other foreign material before application.
- Color: Available in clear or 20 different translucent color stains
- Finish: Gloss, satin, or matte
- Vehicle Type: Solvent based
- VOCs: Less than 100 g/L
- Density: 7.36 lbs/gallon
Recommended thickness per coat:
- Wet mils: 1.5 – 2.0
- Dry mils: 0.5 – 1.2
~ 800 – 1,200 sq. ft / gallon
(varies depending on the porosity and texture of the substrate)
- ASTM D-3359-09 (Tape Adhesion): 4B
- ASTM D-3363 (Taber Abrasion): 39.11 avg
- ASTM D-2803-03 (Proc. B [ISO 4623] Filiform Corrosion): None after 1,000 hr
- ISO 4628-10 (Coating Degradation): None coated over primer
- Corrosion and chemical resistant
- Abrasion resistant
- Water repellant
- UV stable
Corrosion protection, stain resistance, hard to scratch or chip, water repellant, will not break down in sunlight, anti-fouling
Dip, spray or brush on; most substrates require only one coat
Cost per square foot savings over traditional coatings, labor cost savings, protects the initial substrate investment
Low VOCs, no heavy metals, no peeling or flaking into water or soil